When testing whether the steel wire rope electric gourd is powered by power, the commonly used is to test with an electro -pens. The wire rope electric gourd does not connect the rated voltage, and the common faults are as follows:

The failure of the steel rope electric gourd itself mainly includes the control box of the electric gourd and the damage to the electrical appliances that control the circuit. The line disconnection or the poor line contact will make the electric gourds have no way to power. If such faults occur after inspection, the maintenance personnel need to deal with it in a timely manner to avoid the equipment burn out because the equipment does not connect the circuit. Before repairing, it must be disconnected from the power supply of the electric gourd and then power the support. It helps to protect the equipment that can protect the fault and prevent it from greater harm. After finding the problem, the machine repair or replace the wire for the problem. After repairing it, you can re -test, and the electric gourd can also work again.

The impact of external voltage on electric gourds. When the electric gourd is working, if the voltage of the lift motivation end is 10%or more than the rated voltage than the rated voltage, because the startup speed is too small, it will cause the electric gourd to be unable to hang the goods, so that the electric gourd cannot work properly normally Essence When the goods cannot be lifted, the reason should be considered, and then the input voltage of the electric gourd motor is tested with a universal meter. If the voltage is relatively low, you need Work, this can not only ensure the safety of electric gourds, but also increase the life of the electric gourd itself.