Be careful not to twist the chain when using the lifting chain.
None
The 7.1mm lifting chain has 4 times the safety factor, 2.5 times the test load, 3 times the universal pitch, carries 1.5 tons...
The 18mm lifting chain is made of 20Mn2 (manganese steel), with a maximum working load of 10T. The surface treatment includes...
16mm lifting chain can produce various non-standard or specific strength and grade chains according to customer needs, thus b...
The 14mm lifting chain can be polished, blackened, dipped in paint, hung with plastic, electroplated, etc.Widely used in high...
2024-12-05
The difference between 80-class chain and 100-class chain. Mainly because the strength and tension of the chain are different. The strength and tension of the 100-class chain with the same diameter ar
Learn More>>
2024-12-05
When the lifting chain is used as a chain block lifting chain, attention should be paid not to twist the chain. Chain block and electric hoist twist the chain, which will cause chain block and electri
Learn More>>
2024-12-04
The inner length of G80 chain is 3 times the inner length, and the specifications range from 4 to 26 mm.. The selection can be made according to the required load and the diameter of the chain. The li
Learn More>>
2024-12-04
There are many tons of stainless steel in chain block, including 0.5 tons, 1 ton, 2 tons, 3 tons and 5 tons. The lifting standard chain is 3 meters long and the hand zipper is 2.5 meters. It uses brak
Learn More>>