The lifting of the electric gourd should be installed according to the actual situation of the construction site. You can also use the rolling machine to set up a pulley set. Pay attention to the bundle rope to take protection measures to prevent damage to the equipment. According to the weight of the equipment itself, choose a rope crane with a rope. You need to determine the following information before the electric gourd is lifted before hanging: 1. Corresponding to carefully check the electrical gourd to raise some reduction machines before hanging, whether to infuse the lubricant in accordance with regulations, and whether the walking mechanism needs to lubricate whether the lubrication is not to lubricate fat. 2. Carefully check whether the electrical control box is wiring according to the electrical diagram to detect the insulation state of the lift and the walking motor. 3. Check whether the fixed end of the wire rope is tight and whether the block is wedge. 4. Check whether the control button is correct. The fixed -button steel wire rope must be installed firmly. 5. The hooks must be brushed yellow and black zebra patterns in accordance with regulations, and the hook insurance device must be complete. 6. There must be three pressure plates at each end of the wire rope and the roller, and the bolt must be tight. 7. The assembly of the anti -collision device is correct, the rising and falling limit switch is installed correctly.