Steel rope electric gourd is a commonly used small lifting gourd. It has a large market share in the electric gourd industry. Some customers will ask which motor is used when consulting the steel wire rope electric gourd related products. Introduce the motor of the wire rope electric gourd. The rope-rope electric rope-up motor generally uses a cone-shaped motor with a large lift torque to adapt to frequent direct starting in the product's intermittent work. The large torque is 2.4-3 times that of the rated torque. Cone -shaped rotor motor: rotor is conical, brake and motor are integrated. When the motor does not work, the tapered brake tighten the back end of the motor and is always in a braking state. When the motor stator is powered on, in addition to generating rotating tensions, at the same time, axial magnetic pulling force is generated, so that the rotor moves a shaft -directed compressed brake spring, loosen the brake wheel, and the rotor starts to operate. When the motor is powered off, the axial magnetic tattoo disappears, and the brake wheel produces the motor torque under the action of braking spring force, and the motor quickly stops running. The MD1 electric gourd rose was replaced by the dual -motor, the other parts were the same as the CD electric gourd. The motor group is composed of the main lift motivation, the slow -lifting motivation and the slow driving device. When the main lift motivation work, the lift cone -shaped rotor is driven by the slow driving device. At this time, the main lift motor does not work, the fan brake wheels start the clutch, and the entire mechanism is braked by slowly lift the motor brake. In this way, there are two up speeds. The above steel rope electric gourd motors are conventional electric gourd motors, and some special product motors may have differences. For example, explosion -proof electric gourd motors use explosion -type explosion -proof motors. Therefore, before buying products, you need to confirm with customer service.