The ring chain electric gourd can be installed in the suspended work steel, flexible orbit, cantilever suspension rails and fixed hanging points. Use too large places. The content of the turning operation, operation operation and stop operation of the ring chain electric gourd is as follows:

Open operation: Plug in the power supply, connect to control the power supply; try the ring chain electric gourd before lifting the heavy object.

Operation and precautions during the operation of the ring chain electric gourd during operation: The heavy objects shall not exceed the weight prescribed by the heavy machine; it is strictly prohibited from the people under the heavy object or walking; There are no security protection measures in the state, and any part of the human body is strictly prohibited from below the lifting item; the lifting chain should be suspended vertically, and its tilt should be kept in the range between the chain and the vertical vertical line of not more than 10 ° -15 °. Double The chain must not turn over and twist. When the diameter of the chain wear is reduced to the original diameter of 10%, the new chain should be replaced. When the plastic extension of the chain reaches the original length of 5%, it must be replaced. The chain is severely rust and must not be used; strictly abide by the rules of the safety operation of the lifting, it is strictly forbidden to start with cramped and explosive items; this machine should not be manpower or it should not be lifted by the corrosive items of splashing people. In contact, the two are not less than 50mm.

The stop operation of the ring chain electric gourd: After the hanging is completed, put the mixing motor on the supporting frame. It is strictly forbidden to be in a lifting state for a long time; after parking, unplug the power plug.