As a kind of light and small lifting gourd, the ring chain electric gourd is very widely used. In the use, if the following situations are found to be found to be the following situation, then it means that it is "sick" and needs to be "admitted to the hospital" immediately.

The ring chain electric gourd occurs at an abnormal noise at work: this sound may be a failure to control motors, motors, reducers and other failures, and there will be abnormal sounds in these parts of failure. No matter what kind of sound is generated, at this time, the ring -chain electric gourd needs to be "admitted" for treatment. After the inspection of professional maintenance personnel, the abnormal cause can be quickly detected and repaired.

The ring -chain electric gourd cannot be started normally after stopping working: when the electric gourd is carried, if the heavy objects rise to the air, it will be stopped for some reason, and then it will not start when it starts. Need to be "admitted for treatment" in time. Check whether the overall voltage of the equipment is too low. If the voltage is too low, stop the work first, and wait for the voltage to restore it before doing it. If not, it is necessary to check whether the guide rope is installed in the correct position, and it is necessary to check whether the guide rope is not damaged from time to time. If the wear is severe, it should be replaced in time.

The electric motor of electric gourds is too high to rise. The maintenance personnel need to check whether the electric gourd is overloaded. If the motor is hot caused by the overloaded things, the electric gourd is easily destroyed in this case. If the electric motor that is not overloaded by electric gourds is too high, at this time, you should check whether the electric gourd should work normally in accordance with regulations. When the electric gourd is working, the rotation of the motor will also cause friction. The electric gourd caused by friction heat is too high.