Manual hydraulic carrier car is a small volume of hydraulic device. It is small, light, and can work in the narrow channel and enter the elevator at a full load. The manual hydraulic carrier vehicle is mainly used in the occasions where the horizontal handling and the crowded place. It is widely used in factories and warehouses such as factories and warehouses because of its compact body, flexible movement, light weight and good environmental protection performance. The operation skills of the manual hydraulic carrier car are as follows:

1.Check whether the hydraulic system is normal and check whether the wheels are stuck

2. Load the neat code on the rubber.

3. Put the ink of the hydraulic car into the middle position of the foot plate.

4. Ascend the hydraulic vehicle to a proper height, keep the balance of the goods.

5. After loading the cargo to the destination, the pressure leakage handle is pulled to the low position to pull out the hydraulic vehicle.

6. One person operates normally, and the two people need to work together to run.

7. Do not insert the departure center position and incomplete insertion when carrying the cargo.

8. It is strictly forbidden to handle loose goods.

9. Hydraulic vehicles shall not be used on the slope greater than 30 degrees.

10. Hydraulic carrier cars are strictly prohibited when other uses (when the scooter is used, used as a high pad, etc.).

11. Check whether the hydraulic system is normal and check whether the wheels are stuck.

12. Load the neat code on the ground plate.

13. Put the hydraulic car mouth into the middle position of the foot plate.

14. Raise the hydraulic vehicle to a proper height and keep a balance.

15. After loading the cargo to the destination, the cargo is pulled and the cargo is reduced to the low position to remove the hydraulic vehicle.