1. Check out inspection: Check whether the technology information is complete, and then whether the spare parts are supporting and complete. Check whether the equipment is bumper. The steel wire rope in the roller should be arranged neatly. Do not contact the shell. Move the rotating part with your hands. There must be no stuck, loosening, and abnormal sound.

2. Prepare before hanging, scrub the oil on the body, add lubricating oil. According to the technical documents of the device, check whether the model beam model is compatible with the equipment. Disassemble the small wheels on the other side of the walking motor.

3. Hanging and adjustment. Use steel wire rope to tie the body, and the bundle should be matched with flexible materials such as broken cloth or rubber plates to avoid scratching the body and hang the body with a 3-5T hand pour on the steel beam. If the lifting cannot be in place, it can be padded with other types of steel on the Gongfang beam to improve the hanging point, or hang it with a car hanging and a tripod. After the position, install the small wheels on the other side of the motor, and adjust the gap between the inner side of the inside of the electric gourd wheel wheel and the wing wing edge of the steel rails according to the GB50278-98 specification. It should be 3-5mm.