The multifunctional multi -function of multifunctional electric hexer is not just talking. The scope of use is very wide. You can do it up and down, and you can also apply to the floor dragging work. It is mainly used for the construction industry, which is a kind of electric gourd that can be used for ground and air.

1.In order to ensure safety and extend the life of the promotional machine, the installation and use conditions of the product shall comply with the provisions of the first chapter of this manual.

2.The calcium base lubricant of the reducer should be replaced regularly, and its cycle cannot exceed half a year. The steel wire rope should be kept lubricating frequently, and the corrosion and twisting of the law are not allowed.

3. When the device is found abnormal, it should be repaired and excluded in time, and it is not allowed to run with illness.

4. Step disassembling steps: First remove the three screws of the large end of the motor, then unplug the motor, and then unscrew the three screws of the inner axis cover cover of the roller. Take out the long shaft, and then pry the deceleration case smoothly, then remove the three screws of the other cover on the reducer. Use an iron rod to hold the short shaft head, top the short shaft, and the two gears can be. Take it out, when installation, the opposite of this sequence can be.